Programming Presets; Setting Up A Preset - VOLTCRAFT 1209050 Notice D'emploi

CHARGE
Pb
DISCHARGE

15. PROGRAMMING PRESETS

The charger can store up to 10 different charge/discharge presets for your convenience, and the
stored presets can be recalled quickly without having to go through the setup process.
When you want to change the values in a preset, press the ENTER button once, then change
the values with the DEC. and INC. buttons. Press the ENTER button once to store the values.
All following displays are taking 2S (7.4 V) LiPo battery as an example.
a) Setting Up a Preset
1. Press the DEC. or INC. button to select the "BATT MEMORY" option from the main menu
and then press the ENTER button to confirm.
BATT/PROGRAM
BATT MEMORY
It is highly recommended to have the menu structure flowchart (see chapter 10) handy
while learning to operate this charger.
2. Press the DEC. or INC. button to select a memory preset number (1-10) and then press the
ENTER button to confirm.
[ BATT MEMORY 1 ]
ENTER SET->
3. Press the ENTER button once when you see "BATT TYPE" in the display.
BATT TYPE
LiPo
4. Press the DEC. or INC. button to select a battery type and then the ENTER button to
confirm.
5. Press the INC. button once to show "BATT VOLTS".
BATT VOLTS
7.4V ( 2S )
For charging Pb battery
For discharging Pb battery
56