dirna Bergstrom Integral Power Manuel De L'utilisateur page 11

INTEGRAL POWER
Remote control
Remote control functions:
1
Unit on/off.
Note: This key is used to run the unit in automatic
mode F4
2
Blower speed control (manual mode only).
Note: with the unit running in automatic mode F4, the unit will
pass into manual mode F0. when this key is pressed. Users can
therefore use this key to choose the required airflow, with the
display showing V1, V2, V3, V4, V5, V4, V3, V2, u1
3
Temperature control: Comfort temperature can be controlled
by briefly pressing the keys
Registering the remote control:
To register the remote control, keep the key
with the unit off. The display will flash C
Off key on the remote control within 30 seconds and the unit will give out an
acoustic signal as confirmation. If this does not happen, repeat the whole operation.
Air conditioning for vehicles
(15/27ºC - 59/80ºF).
of the control panel pressed down
.When it stops flashing, press the On/
11
EN
1
3
2