dirna Bergstrom Integral Power Manuel De L'utilisateur page 10

INTEGRAL POWER
EN
F0 Function - Manual unit operation
F0 This option allows users to select the comfort temperature and change the blower
speed of the unit manually.
The comfort temperature is controlled by briefly pressing the keys
- 59/80º F). The blower speeds can be controlled by keeping the keys
down, with the display showing V1, V2, V3, V4, V5.
F1 - Function - Digital thermometer function
In this function, Integral Power displays the interior cabin temperature.
F4 Function - Automatic unit operation
Select F4 to display CA alternating with the selected temperature. Users can select
comfort temperature manually. With this function, the unit automatically regulates its
functions until the selected comfort temperature is reached.
Comfort temperature can be controlled by briefly pressing the keys
59/80º F).
F6 Function. Selecting ºF
To activate this function, keep the ON/OFF key
shows F6, and then release the key to directly enable ºF. To return to ºC, keep the
control panel key
will flash on the display C
key . The control is disabled when carrying out this operation, meaning it must be
registered again once finished.
pressed down with the unit switched off, at which point C
when it stops flashing, release the control panel
10
Air conditioning for vehicles
pressed down until the display
(15/ 27º C
pressed
(15/ 27 ºC -