Door Reversibility; Instructions For Totally Built-In Appliances - Zanussi ZBF 3124A Mode D'emploi

Door Reversibility

The appliance is supplied with the door
opening to the right.
For door opening in the opposite direction,
perform the following actions prior to
installation
1. Unscrew the upper pin and remove the spacer
2. Remove the door.
3. Unscrew with a key the lower pin and replace it
on the opposite side.
4. Reinsert the door, refit the spacer and rescrew
on the opposite side.
the upper pin
Instructions for totally built-in
appliances
Building-in instructions
Dimensions of housing
High (1)
Depth (2)
Width (3)
For safety reasons, minimum ventilation must be as
shown in Fig.
Attention: keep ventilation openings clear of
obstruction.
It is necessary that the niche is provided with a
conduct of ventilation having the following
dimensions:
Depth 50 mm
Width 540 mm
Make sure that a distance of 44 mm is maintained in
the lower part between the kitchen furniture and the
border of the appliance.
The lower hinge cover inserted in the accessories
bag, is useful to guarantee the exact position of the
kitchen furniture and the appliance.
Also make sure that the appliance does not clamp
the mains cable
880 mm
550 mm
560 mm
50 mm
D567
PR0
48
min.
200 cm 2
min.
200 cm
2
3
1
2

E
