Hendi 2000 Mode D'emploi page 6

Check for your cookwares for Induction
§ The cookware used with Induction cookers should have flat bottom for good contact
with the surface of the cooking zone. Please check the flatness by rotating a ruler
across the bottom of the cookware.
bottom pan curved or
pan does not meet the
NL EN
minimum size
heavy handle tilts the pan
Operating the appliance
§ Put the plug in the socket
§ Set the pan of your choice on the cooking surface, bearing the above mentioned
instructions in mind
Note! Do not leave your pan on the appliance while empty as this may lead to damage
to your pan
§ Switch the appliance on by pressing the "ON/OFF key"
key or power key
If your pan is suitable for induction and has a bottom diameter of 12cm, at minimum,
the appliance will go into operation.
If you have pressed the power key
operation and you will recognize this from the fact that the fan will go on and the
display will show a capacity position of "100".
6
Heruntergeladen von manualslib.de
deformed
to activate the appliance
Handbücher-Suchmachiene
flat pan bottom
pan size meets or exceeds
the minimum size
pan is properly balanced
, the appliance will enter in capacity mode
and either the temperature