Hendi 2000 Mode D'emploi page 4

Special safety regulations
§ Caution! Make sure the cord does not come in contact with hot components while
using the appliance.
§ Do not install the appliance near objects and appliances that may be affected by a
magnetic field, like, e.g., TVs, radios, bank cards and credit cards.
§ Maintain a minimum clearance of 15 cm around the appliance for ventilation.
§ Never leave any metal objects on the appliance.
§ Never switch on the appliance with an empty pan on top of it, as this may result in
serious damage to the appliance.
§ Make sure the appliance is not set up near water vapour or greasy vapours. The fan of
the appliance will take in these vapours and this will cause grease or moisture to
accumulate in the appliance which may result in a short-circuit in the appliance. Clean
the grease filter regularly
Preparations before using for the first time
§ Check to make sure the appliance is undamaged. In case of any damage, contact your
supplier immediately and do NOT use the appliance.
§ Remove all the packing material.
§ Clean the appliance with luke-warm water and a soft cloth.
§ Level the appliance.
§ Make sure that a clearance of 15 cm is maintained around the appliance with respect
to ventilation of the appliance.
Position the appliance in such a way that the plug is accessible at all times.
§
Suitable cooking equipment
§ Only use the Grill plate supplied with this appliance, or
to use pans that have the following properties:
EN NL
•
4
Heruntergeladen von manualslib.de
The pan must be suitable for induction. The following logo is usually
displayed on the bottom of the pan:
Handbücher-Suchmachiene