Agilent Technologies Turbo-V 550 Notice De Mode D'emploi page 276

17 Technical Information
Use
•
I
X
Figure 20
where:
276/310
Press the CURRENT push-button and the display shows:
= 0 . 0
. .
I = is the DC current drawn by the pump range (0.00 to 10.00
Ampere)
P= is the DC power drawn by the pump (range 0 to 999 Watt)
KRPM = is the theoretical rotational speed of the pump as a
function of the controller output frequency (range 3 to 42
KRPM)
°C = is the temperature of the outer ring of the upper bearing
(range 00 to 99 °C)
X = during operation a selected set point condition (1 or 2
contrast inverted) appears when the programmed threshold
speed value is not reached.
Turbo-V 550 Controller User Manual / 87-900-873-01 (G)
0 A
K R P M
P = 0
X X ° C
W