Settings And Selection Of Ballistic Output Formats - Leica GEOVID HD-B Notice D'utilisation

POINT OF IMPACT CORRECTION USING
ELEVATION ADJUSTMENT (CLICK / MOA
ADJUSTMENT)
Variations in the point of impact can be compensated
by a corresponding adjustment of the reticule on your
telescopic sight.
Taking into account the measured range, the trajectory
of the bullet and the set zeroing distance (see p. 42),
the Leica Geovid HD-B can display the required
adjustments, i.e. the relevant number of clicks.
For the different elevations, you can specify whether
the clicks are to be specified
– based on the international standard MOA (minutes
of angle) graduation, or
– in 5 or 10 millimeters graduations.
SETTINGS AND SELECTION OF BALLISTIC
OUTPUT FORMATS
Start with step 1 if you have not yet opened the menu
system and with step 3 if you have already set the unit
of measure and is still flashing in the display.
ABC
1. Press and hold (≥2s) the secondary / menu button
(8).
• appears.
US.EU
2. Briefly (<2s) press the secondary / menu button
three times.
• The display changes to
ABC.
3. Select the relevant ballistic setting by repeatedly
pressing the main / release button (7).
– or
EHr
– or
HOLd
– (1MOA), or
1-1
– (1/3MOA), or
1-3
– (¼MOA), or
1-4
–
10
–
5
4. Save your setting by pressing the secondary /
menu button.
• The saved setting is displayed continuously for 4s
as confirmation and the display then goes out.
and and then to
bALL SId
45