Adjusting The Water Temperature - Geberit 185 Mode D'emploi

Operation
Operation
Release flush
Hold your hand in the area where you expect the
water jet. Water will start flowing. Removing your
hand stops the flow of water (factory setting).

Adjusting the water temperature

With Geberit lavatory taps, type 185 and 186 with
mixer, without handle, the temperature can only
be set by a skilled person.
With Geberit lavatory taps, type 185 and 186
without mixer, the temperature cannot be set.
Turn the handle to the position to select the
required water temperature.
+/- °C
12
Adjusting the water temperature using
generator and below-desk mixer
1
Loosen the locking screw on the below-desk
mixer and turn the adjusting disc in the required
direction.
+/- °C
3
PH 2
2 Check if the set temperature is appropriate for
your requirements. If not, adjust the setting.
+/- °C