Stand Ds 450; Accessories; Presentation - Husqvarna DS 450 Manuel D'utilisation

Stand DS 450

It is our wish that you will be satisfied with your product and
that it will be your companion for a long time. Think of this
operator's manual as a valuable document. By following its'
content (using, service, maintenance etc) the life span and
the second-hand value of the machine can be extended. If
you ever lend or sell this machine, make sure that the
borrower or buyer gets the operator's manual, so they will
also know how to properly maintain and use it.
A purchase of one of our products gives you access to
professional help with repairs and services. If the retailer who
sells your machine is not one of our authorised dealers, ask
him for the address of your nearest service workshop.
Husqvarna Construction Products has a policy of continuous
product development. Husqvarna reserves the right to modify
the design and appearance of products without prior notice
and without further obligation introduce design modifications.
• The stand is for drilling in roofs, walls and floors.
• The base plate is made of aluminium and is therefore very
light weight.
• The column can be tilted 0-60°.
• The drill stand is equipped with a quick connection plate
for the drillmotor.
• The feeder housing has two feeding speeds: 4.4:1 for
large drills and 1:1 for small drills.
• The feed lever can be used to set the column tilt and to
lock the quick mounting.

Accessories

• Drill column, 2 m
• Transport wheels
• Vacuum plate
• Vacuum pump
• Drill motor spacer block
• Switch box (USA only)
4 –
English

PRESENTATION