Transport Wheels; Change Drill Column - Husqvarna DS 450 Manuel D'utilisation

ASSEMBLING AND ADJUSTMENTS
Transport wheels (accessory)
• Push the aluminium bail (A) towards to the mounting on
the stand.
• Place the wheel set (B) over the aluminium bail.
• Insert the bolt (C) and fit the nut. Screw the bolt tight.
Change drill column (accessory)
• Remove the bolt (A).
• Gently knock away the axle (B).
• Loosen the locking screw (C).
• Remove the drill column from the stabiliser.
• Unlock the feeder housing. Remove the feeder housing
from the column.
Assemble the parts in the reverse order.
10 –
English