Arneg Perth 6 P Manuel D'installation Et De Service page 66

Table des Matières

Publicité

Perth 6P - Perth 6P 1E
English
29. 7 Reverse the doors
ATTENZIONE!: Attention: Cut off power supply to the cabinet before proceeding with all operations
ThePerth 3 refrigerated wall cabinet is normally supplied in the version with right-hand opening doors (Fig.1)
If required, the direction of door opening can be inverted from right to left .
Is not possible to invert one or more doors individually (Fig. 2).
Equipment required:
Hammer - Spatula - Drill - Drill bit Dmax= 9mm - Pliers - Pliers for elastic rings - Hexagonal spanners 2/3/4 -
Cross-head Screwdriver - Metal pipe / spacer in metallo.
In order to invert the doors, follow the indications below:
1
Detach the spring-loading spanner from its
housing.
2
Insert the spring-loading spanner into one of the holes
ofthe lower pin. Rotate as indicated so as to free the
pin.Keeping the spanner still in the position indicated,
remove the spring-loading pin and place both the pin and
the spanner in a safe place.(1) Loading pine.
1
56
Fig.1
2
Fig.2
05060214 00 09-2021

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Perth 6p 1e

Table des Matières