Maxi-Cosi Dana Mode D'emploi page 10

Masquer les pouces Voir aussi pour Dana:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

15 Remove Seat Fabric
1. Undo restraint straps and push anchors
through pad (see step 12). Remove shoulder
strap pads.
2. Unfasten seat fabric from stroller (Figure
15).
3. Detach the elastic strap from around the
seat frame (Figure 15).
4. Unsnap seat fabric from stroller frame
below seat (Figure 15).
5. Raise footrest and remove lower pad from
footrest.
16 Remove Seat
1. Pull out knob and slide up as shown (Figure
16).
2. Press tabs at rear of seat frame to release
seat posts (Figure 16a). Lift seat and
backrest support off stroller frame.
To reattach seat:
1. Place seat with backrest support into
position on stroller frame.
2. Push seat posts into receptors until pins
"click" (the reverse of Figure 16a).
3. Pull knobs out and slide down into
receptors until they "click" (the reverse of
Figure 16).
To Use
8
x2
x2
x2
x2
x2
x2
16
15
x2
x2
16a
x2

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cv258

Table des Matières