Safety Instructions - SOMFY HOME MOTION Ixengo L 230V RTS Manuel D'installation

Ixengo L 230V RTS
translated version of the guide
ContentS
1 - Safety instructions �������������������������� 1
1.1 Caution - Important safety instructions
1.2 Introduction
1.3 Preliminary checks
1.4 Electrical pre-equipment
1.5 Safety instructions relating to installation
1.6 Regulations
1.7 Assistance
1.8 Risk prevention
2 - Product description ������������������������� 4
2.1 Composition of the standard kit * - Fig. 1
2.2 Dimensions - Fig. 2
2.3 Field of application - Fig. 3
3 - installation �������������������������������� 4
3.1 Dimensions to be defined for the installation - Fig. 4
3.2 Installing the pillar mounting bracket
3.3 Installing the gate leaf mounting bracket - Fig. 6.
3.4 Installing the stop blocks on the ground - Fig.7
4 - motor electrical connection - Fig. 8 ������������ 4
5 - Locking/unlocking the motors ���������������� 4
6 - technical data ������������������������������ 4
Copyright © 2015 Somfy SAS. All rights reserved.

1 - SaFety inStruCtionS

This symbol indicates a danger, the different
degrees of which are described below.
1
Indicates a danger which may result in immediate death
1
or serious injury
2
2
2
2
Indicates a danger which may result in death or serious
2
injury
3
4
Indicates a danger which may result in minor or moderate
4
injury
4
4
Indicates a danger which may result in damage to or
4
destruction of the product
4
4
1.1 Caution - important safety instructions
For reasons of personal safety, it is important to follow all
the instructions, as incorrect installation can lead to serious
injury. Retain these instructions.
The motorisation must be installed and adjusted by a
professional motorisation and home automation installer, in
compliance with the regulations of the country in which it is
to be used.
The user manual and installation manual must be given to
the end user, explicitly stating that installation, adjustment
and maintenance of the motorisation must be performed by
a professional motorisation and home automation installer.
1.2 introduction
> important information
This product is a motor for hinged gates, for residential use.
To ensure compliance with the standard EN 60335-2-103,
this product must be installed with a Somfy control box.
The assembly is together designated as a "motorisation".
The main purpose of these instructions is to satisfy the
requirements of the aforementioned standard and to ensure
the safety of equipment and persons.
Any use of this product outside the field of application
described in these instructions is prohibited (see "Field of
application" paragraph in the installation manual). Such
use, and any failure to comply with the instructions given in
this guide, absolves Somfy of any liability and invalidates
the warranty.
The use of any safety accessories not validated by Somfy
is prohibited.
In case of any doubts when installing the motorisation, or
to obtain additional information, consult the website www.
somfy.com.
The instructions may be modified if and when there is a
change to the standards or to the motorisation.
Danger
Warning
PreCaution
attention
Warning
1