Installation; General; Items Supplied - Pelgrim PRS2 Consignes D'installation

INSTALLATION

General

• Carefully read the complete guide before installation and use of the appliance.
• The filtering device is equipped with all the fixings necessary for its installation and suitable
for most of the furniture.
• This kit transforms the hood from duct out to filtering mode (replacing charcoal filters can be
reordered separately).
• By definition, a filtering hood (internal recycling) purifies the cooking fumes, forcing them to
pass through the filter and recycles them into the kitchen. The use of the filter reduces the
performance of the hood.
• The kit has been designed for the Pelgrim Hood in hob model IKR2083RVS.

Items supplied

• No. 1 metal box with external metal grid containing the active carbon filter (A)
• No. 1 flexible pipe 50 cm (B)
• No. 1 roll of adhesive tape (C)
Everything is to be assembled neatly as indicated in the following points.
A
To apply the kit you will need to interrupt the kitchen socket where you want to apply the air
outlet. The whole pipeline must necessarily pass under the base of the piece of furniture, in
the space of the socket. This kit has been designed to be installed on furniture with a socket
height of 10 cm.
Warning! Failure to comply with the sequences could result in consequences and
problems in the successful installation.
B
C
EN 5