Adjusting The Audio For Wall Mounting; Replacing The Remote Batteries - Bose SOLO 5 Notice D'utilisation

Problem
Soundbar doesn't
reconnect to
a previously-
connected Bose
Home Speaker or
Bose Soundbar
Delayed audio
when connected
to a Bose Home
Speaker or
Bose Soundbar
Status indicator
is red

Adjusting the audio for wall mounting

After wall mounting the soundbar, adjust the audio for better bass sound.
Press and hold
Tip: If you remove the soundbar from the wall, repeat to return the soundbar to default
audio settings.

Replacing the remote batteries

Replace both batteries when the remote control stops operating or its range seems
reduced. Use Alkaline batteries.
1. Slide open the battery compartment cover on the back of the remote.
2. Remove both batteries.
3. Dispose of the batteries according to the regulations in your area.
4. Insert two AA (IEC-LR6) 1.5V batteries or the equivalent. Match the + and – symbols
on the batteries with the + and – markings inside the compartment.
5. Slide the battery compartment cover back into place.
What to do
Connect using the Bose Music app. You can access this option from the
Settings menu.
Visit btu.Bose.com and check for available software updates.
System error: Call Bose Customer Service. Refer to the contact sheet in the
carton.
for five seconds.
C A R E A N D M A I N T E N A N C E
E N G L I S H - 3 7