Bose SOLO 5 Notice D'utilisation page 36

C A R E A N D M A I N T E N A N C E
Problem
Cannot play
Bluetooth
®
Distorted sound
Remote control
is inconsistent or
does not work
Sound is coming
from the TV
Soundbar doesn't
connect with
a Bose Home
Speaker or Bose
Soundbar
3 6 - E N G L I S H
What to do
• On your soundbar:
– Pair a device (see page 24).
– Clear the soundbar's pairing list (see page 25).
– Try pairing a different device.
• On your Bluetooth device:
– Turn off and on the Bluetooth feature.
– Remove the soundbar from the Bluetooth menu. Pair again.
– Use a different music source.
– Check your Bluetooth device for compatibility. Refer to your
Bluetooth device's owner's guide.
• Increase the volume on the soundbar, your mobile device and
music source.
• Ensure you are using the correct device.
• If more than one Bluetooth device is connected, pause your streaming
device first.
• Disconnect other Bluetooth devices when not in use.
• See "Distorted sound" or "No sound."
• Secure cable connections on the soundbar and TV (or other
connected sources).
• If the soundbar is connected to a TV output labelled VARIABLE (VAR),
reduce the TV volume.
• Use alternate setup (see page 27).
• If wall mounting the soundbar, adjust the audio (see page 37).
• Unplug the power cord for at least one minute and reconnect.
• Check the batteries to see if they are installed properly or if they need to
be replaced (see page 37).
• Point the remote control directly at the soundbar.
• Check that the status indicator flashes when you press the remote
volume or mute button.
• Unplug the power cord for at least one minute and reconnect.
• Turn off your TV speakers (see page 18).
• Mute or decrease the volume your TV.
Make sure your soundbar is ready to connect: On your Bose Solo 5 TV
sound system remote control, press and hold the Bluetooth button
the Bluetooth indicator on your Bose Solo 5 TV sound system blinks blue.
Make sure that your Bose Solo 5 TV sound system is within 30 ft (9 m) of
your Bose Home Speaker or Bose Soundbar.
until