Osd Setting; Osd Timeout; Osd Transparency; Favorite - AVANIT S2X Mode D'emploi

System settings

11.6 OSD Setting

11.6.1 Subtitle Display
Here you can activate or deactivate the display of subtitles.

11.6.2 OSD Timeout

Here you can set the time in seconds (1 - 10) during which the info menu
remains on screen when changing channels.

11.6.3 OSD Transparency

Here you can select how transparent you want the OSD to be.

11.7 Favorite

Here you can rename your favorite channel groups.

11.8 Other

11.8.1 LNB Power

Here you can select whether the reception head (LNB) is to be supplied with
power.

11.8.2 Channel Play Type

Here you can set whether all channels, only free-to-air channels or only encoded
channels are to be displayed.

11.8.3 Channel Change

When switching between different channels, it often happens
that a short pause occurs until the receiver shows the picture of
the selected channel.
Here you can set whether you want the picture to be frozen for a short instant or
prefer a black screen during this time.

11.8.4 Beeper

Here you can set whether you want your TV set to play an acoustic signal while
you're in the "Antenna Settings" menu.
56 AVANIT S2X