Proper Handling Of Batteries; Safety Instructions; Moisture; Electric Hazards - AVANIT S2X Mode D'emploi

Safety Instructions
1

Safety Instructions

1.1

Moisture

• Make sure that the receiver and mains plug do not come into contact any
moisture whatsoever.
1.2

Electric Hazards

• Connect the receiver to 175 - 250 V ~, 50/60 Hz only.
• During an electric storm or operational faults, pull the plug.
1.3

Mechanical Hazards

• Do not bend or squeeze the cable.
• Repairs on plug, cable or receiver may only be performed by qualified skilled
personnel.
• Do not place any heavy objects on the receiver.
1.4

Correct installation site

• Place the receiver on a solid flat surface.
• Protect the receiver from moisture, heat, dust, dirt, etc.
• Ensure sufficient ventilation (do not cover the ventilation slots)

23.1 Proper handling of batteries

• Batteries must be kept away from children.
• Leaking batteries may cause damage to the environment and the remote
control.
 Batteries must be disposed of in accordance with current legal regulations
(see chapter Entsorgung, page°30).
40
Before operating the receiver, please read the safety
instructions carefully.
Please observe all warning and notes on the unit and in
this manual.
Attention!
AVANIT S2X