Delete All; Antenna Selection; Single Satellite Search / Multi Satellite Search / Tp List - AVANIT S2X Mode D'emploi

Change

•
•
•
9.2

Delete All

All channels are deleted.
10 Installation

10.1 Antenna Selection

If several antennae are connected to your receiver, you can select the antenna
whose signal you want the receiver to receive.
10.2 Satellite List
Here you can set which satellites you are receiving.
10.3 Antenna Setup
In the Antenna Setup menu, you can make extensive settings with regard to the
received satellites, transponders, frequencies, motorized control, polarization,
etc.
10.4 Single Satellite Search / Multi Satellite Search / TP
List
In the "Single Satellite Search" menu, you can search individual satellites for
receivable channels.
In the "Multi Satellite Search" menu, you can search all received satellites for
receivable channels.
AVANIT S2X
Press blue "AUDIO" key
The red "FIND" key can now be used to resort the channel list.
The green "ZOOM" key can be used to rename the channel.
The blue "AUDIO" key can be used to delete the channel.
If you're in doubt, have an expert make the settings in this
menu.
For normal use, it is usually not required to make any
settings here.
Attention!
Installation
53