Whirlpool EL88TRRWS03 Guide D'utilisation Et D'entretien page 6

Replace Door and Hinges
1. Replace the parts for the bottom hinge as shown and tighten
screws. See Bottom Hinge graphic. Replace the refrigerator
door.
NOTE: Provide additional support for the door while the
hinges are being moved. Do not depend on the door magnets
to hold the door in place while you are working.
2. Assemble the parts of the top hinge as shown in the Top
Hinge graphic. Do not tighten the screws completely.
3. Adjust the door so that the bottom aligns evenly with the
cabinet. Tighten all screws.
Handle
A
A. Grommet
B. Handle
C. Setscrews
Base Grille
6
Door Removal and Replacement
B
C
Final Steps
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
1. Plug into a grounded 3 prong outlet.
2. Reset the control. See "Using the Control."
3. Return all removable door parts to door and food to
refrigerator.
Top Hinge
A
B
C
A. Top Hinge Cover
B. 3 " Hex-Head Hinge Screws
/
8
C. Top Hinge
Bottom Hinge
A
B
C
D
E
A. Door Stop Screws
B. Door Stop
C. Hinge Pin
D. Hinge Pin Nut
E. 5 / " Hex-Head Hinge Screws
8