Product Features; Technical Data; Noise/Vibration Information; Declaration Of Conformity - Bosch GSA 10,8 V-LI Professional Notice Originale

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Saw blade*
2 Base plate
3 Locking sleeve for saw blade
4 Stroke rod
5 Battery unlocking button
6 Lock-off button for On/Off switch
7 On/Off switch
8 Battery charge-control indicator
9 Temperature control/overload protection
indicator
10 Handle (insulated gripping surface)
11 Battery
12 Saw blade holder
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.

Technical Data

Sabre saw
Article number
Rated voltage
Stroke rate at no load
n
0
Tool holder
Stroke
Cutting capacity, max.
– in wood
– in non-alloy steel
– Pipe diameter
Weight according to
EPTA-Procedure
01/2003
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
Bosch Power Tools
GSA 10,8 V-LI
Professional
3 601 F4L 9..
V= 10.8
-1
min 0 – 3000
SDS
mm 14.5
mm 65
mm
mm 50
kg 1.2

Noise/Vibration Information

Measured sound values determined according
to EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 70 dB(A);
Sound power level 81 dB(A). Uncertainty
K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Cutting board: Vibration emission value
2
a =8.1 m/s , Uncertainty K=1.5 m/s
h
Cutting wooden beam: Vibration emission value
2
a =12.3 m/s , Uncertainty K=1.5 m/s
h
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.

Declaration of Conformity

8
We declare under our sole responsibility that
the product described under "Technical Data" is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 2006/42/EC.
English | 19
2
,
2
.
1 619 P09 020 | (11.8.10)