Date/Time Setting; Timer Mode - Dimplex RCE 050 Instructions De Montage Et D'utilisation

7.5 Date/Time setting

The control includes a real-time clock with calender
function. The clock has a backup battery (type
CR2032, 3V), which supplies the clock with power in
the event of a power failure.
Setting the date and time:
Press the MENU key. Select Date/Time and press the
ENTER key.
Press and to set the correct day of the month
and press the ENTER key.
Repeat this process until the date and time have been
set and press the ENTER key to save the settings.
Press the BACK key as soon as
turn to the main screen.
www.dimplex.de/en

appears and re-
RCE050_200_gb · 04/15/A
RCE 050, RCE 100, RCE 150, RCE 200
8 Modes
The radiant heat convector can maintain a constant
room temperature with the following modes:
8.1 Manual Mode heats the room to a pleasant tem-
perature of 21 ° C.
8.2 Eco Mode (energy-saving mode) maintains a room
temperature of 18 ° C. Significant energy savings
can be achieved by reducing the room temperature
slightly. The green display indicates the energy-
saving mode.
8.3 Frost Protect Mode maintains a room temperature
of 7 ° C. The blue display indicates the Frost Pro-
tect Mode.
8.4 Off Select the mode "Off" to switch off the device.
This mode should be used if heating is not required
for a prolonged period.
Press one of the keys to activate the display and then
select the desired mode.
NOTE NOTE
The room temperature can be changed with the
keys in all modes. In Timer Mode, this change is
only temporary and the device returns to the pre-set
program afterwards.

8.5 Timer Mode

ATTENTION!
It is advisable to use the timer function to
reduce the operating costs. Using the device
in permanent heating operation can result in
increased operating costs.
The device is pre-programmed with a range of usable
heating profiles. There are four options available -
three pre-set programs and a time program which can
be freely selected by the user:
1. Out all Day - (pre-programmed) - the following pre-
set heating times are available:
Monday to Sunday 7 am to 8.30 am and 5.30 pm to
10 pm, can be changed if necessary.
2. Home all Day - (pre-programmed) - the following
pre-set times are available:
Monday to Sunday 8 am to 9 pm, can be changed if
necessary.
3. Holiday - (pre-programmed for 7 days with frost pro-
tect 10 ° C) - number of programmable holiday days:
1 to 300
4. User Timer - offers maximum flexibility for the user.
Four time blocks are available per day, which can
be adapted individually for each weekday.
To select the Timer Mode, press the MENU key, then
select the mode with the key
+
and press ENTER.
EN-17