Installation; Installing/Replacing The Lamp; Danger To Life - EuroLite TS-7B Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

9
10
Typ/Type/Type/Tipo: EUROLITE TS-7B
Spannungsversorgung/Power supply/Aliment.: 230 V AC, 50 Hz ~
Ges. anschl. wert/Power cons./Puiss. de rendement/Cons.: 300 W
Sicherung/Fuse/Fusible/Fusible: F 3 A, 250 V
Lampe/Lamp/Lampe/Lámpara: ELC 24 V7250 W
Vor Gebrauch Anleitung lesen. Lire le mode d'emploi avant l'utilisation.
Lea el manual del usuario antes de la puesta en marcha.

INSTALLATION

Installing/Replacing the lamp

The lamp must only be changed when wearing appropriate protective clothing (protection glasses, protection
gloves, helmet with sight, leather apron).
The lamp life given by the manufacturer must never be exceeded. This is why you need to take notes on the
operational time of the lamp or check the operating hour meter (if available) regularly and replace the lamp in
time.
Keep exchanged lamp in a protective container and remove accordingly.
During the operation, the lamp reaches temperatures of up to 600° C.
Before replacing the lamp, unplug mains lead and let the lamp cool down (approx. 10 minutes).
During the installation do not touch the glass-bulbs bare-handed! Please follow the lamp manufacturer's
notes!
Do not install lamps with a higher wattage! Lamps with a higher wattage generate temperatures the device
was not designed for. Damages caused by non-observance are not subject to warranty.

DANGER TO LIFE!

Only install the lamp with the device switched off!
Unplug from mains before!
CAUTION!
The lamp has to be replaced when it is damaged
or deformed due to the heat!
21/54
11
(9) Fuseholder
(10) Power supply
(11) DIP-switches
(12) Microphone
12
(13) Control LED
13
(14) DMX-In socket
(15) DMX-Out socket
14
15
00026556.DOC, Version1.3

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Led h2o

Table des Matières