Joystick Control Features - Abus TVHD60000 Manuel Utilisateur

6.7 Joystick control features

The functions of the joystick control are ordered into 3 levels.
Operating lock
Operating lock
The operating lock is used to prevent any unintentional changes to the camera parameters.
After restarting the camera, the operating lock is initially deactivated. If the joystick control is not
operated for approx. 10 minutes, then the operating lock will be activated.
The operating lock can be deactivated by pressing the joystick for approx. 5 seconds in one
direction (left, right, up or down; alternatively pressing the top of the joystick).
Zoom / IR on/off
The second operating level includes the following functions:
Joystick up / down
Joystick left / right
OSD
The OSD menu (on-screen display) is opened by pressing the joystick. You can find more
descriptions under the following point in the user guide.
Zoom, IR on/off
Up: zoom in; increase zoom factor
Down: zoom out; decrease zoom factor
5 different zoom levels are available (5/7/9/12/15 mm). By pressing
and holding a button for longer than 2 seconds, the next highest or
lowest zoom level will be activated)
Left / right: activate or deactivate the integrated infrared LEDs in night
mode. A message appears in the display showing the mode currently
set.
IR ON: Infrared LEDs activated
IR OFF: Infrared LEDs deactivated (the function of the
integrated IR-cut filter remains unaffected, and external
IR lamps can continue to be used).
30
OSD