Sony SU-PF1L Mode D'emploi page 9

3
Take up the slack out of the Power Cord and Display Interface Cable
already drawn through the hole on the stand.
Pull the ends of the Power Cord and Display Interface Cable already drawn through the hole on the stand
and take up the slack out of the cord and the cable.
Fix the Display Unit
Attach the fixing plate to prevent the Display Unit from falling.
1 Insert the fixing plate between the screw on the upper part of the fixture on the stand and the hook on the
Display Unit.
2 Slide the fixing plate until the corner of the L-figure hits against the screw.
Power Cord and Display
Interface Cable
Fixing plate
9
(US)