Sony SU-PF1L Mode D'emploi page 4

WARNING
If the following precautions are not observed, serious injury or death through fire, electric shock, the
product toppling over, or the product dropping can result.
Do not lean on or hang from the stand with the Display Unit installed on it.
The stand may topple over and cause serious injury or death.
Do not cover the ventilation hole of the Display Unit.
If you cover the ventilation hole (with a cloth, etc.), heat may build up inside and
cause fire.
Do not allow the Power Cord or the Display Interface Cable to be pinched.
• Do not allow the Power Cord or the Display Interface Cable to be pinched when
you install the Display Unit on the stand. If the Power Cord or the Display
Interface Cable is damaged, this may result in a fire or an electric shock.
• Do not step on the Power Cord or the Display Interface Cable when you carry
the Display Stand. The Power Cord or the Display Interface Cable may be
damaged, and this may result in a fire or an electric shock.
CAUTION
If the following precautions are not observed, injury or property damage may occur.
Do not install any equipment other than the specified product.
This stand is designed for use with the specified product only. If you install equipment other than specified, it may
fall and cause injury or property damage.
Attaching the Display Unit.
Be sure to attach the Display Unit to the stand with the supplied fixing plates. If the Display Unit is not attached
securely, it may fall and cause injury.
Do not apply weight to the glass or subject it to any kind of impact.
Do not apply weight to the glass with your hand when installing the Display Unit. Do not hit the glass with hard
objects, such as a screwdriver, etc.
The glass may break and cause injury.
4
(US)