English Manual
Features
•
USB 2.0 specification compliant, backwards compatible with USB 1.1
•
Supports EHCI, UHCI, OHCI USB interface
•
Compatible with any widely used USB enabled operating system
•
Embedded USB hub to share different USB peripherals between all computers
•
LED port display for easy status monitoring
•
Beep sound when switching between computers
•
Auto scan function
•
Supports monitor resolution of up to 2048 x 1536 and high bandwidth over 250MHz
•
Supports DDC, DDC2, DDC2B
•
Bus powered (if used with self powered or low power USB devices) or self powered
(requires power supply, not included)
Package Contents
•
LINDY CPU Switch LITE USB 2.0, 2 Port or 4 Port model
•
2 or 4 KVM combo cables USB 2.0 + VGA (depending on model)
•
This manual
Installation
1. Before installation, please switch off all of the devices.
2. Connect the computers to the CPU Switch LITE USB 2.0 using the supplied 2m KVM
USB 2.0 + VGA cables.
3. Connect either a PS/2 or USB keyboard and mouse, and a monitor to the sockets on the
LINDY CPU Switch LITE USB 2.0.
4. The console port of the CPU Switch LITE USB 2.0 supports PS/2 or USB keyboards and
mice, in any combination.
5. You can use a (self powered) USB 2.0 hub to connect extra USB devices.
Power requirements / USB bus powered operation
The CPU Switch LITE USB 2.0 can draw its power from either the connected computers or from
an optional external 5V DC power supply (regulated voltage - an old style heavy power supply
with a transformer may damage the connected USB devices and computers).
When using the CPU Switch LITE 2.0 in USB bus power mode (without the optional power
supply), you can connect low power USB devices (driving up to 100mA power from the USB
bus), or self powered USB devices only!
Tip: You can find the power requirement of any USB device which is connected to your PC by
launching –
Windows Device Manager ►USB Controller ►USB Hubs ►Properties ►Power
and then checking the 'Power Required' in the 'Attached Devices' box.
ENG 2