Calc'n'clean - Bosch Espresso TES 506 Série Notice D'utilisation

Masquer les pouces Voir aussi pour Espresso TES 506 Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

34
appears in the display. To start the cleaning
procedure, press the start button (10).
The display will guide you through the
programme.
Empty drip tray
Insert drip tray
● Empty drip tray (8) and replace them.
Cleaning in progress
The appliance rinses twice.
Open drawer
● Open the drawer (4).
Fill cleaner
● Drop a Bosch cleaning tablet in the draw­
er (4) and close.
Cleaning in progress
The cleaning pro gramme will now run for
about 8 minutes.
Empty drip tray
Insert drip tray
● Empty drip tray (8) and replace them.
The appliance has inished cleaning is
ready for use again.

Calc'n'Clean

Duration: approx. 35 minutes.
Calc'n'Clean combines the separate func­
tions of descaling and cleaning. If both
programmes are due to be run soon, the
espresso machine automatically suggests
this service programme.
Important: If there is a ilter in the water
tank (17), it needs to be removed before the
service programme is run.
Calc'n'Clean required!
If the message
appears on the display, press the
button (13) for 3 seconds and then press
the start button (10). The service pro­
gramme will start.
Robert Bosch Hausgeräte GmbH
TES506_1DE.indb 34
To run Calc'n'Clean before being prompted,
press the
3 seconds. Then press the
ton (13) briely twice. Turn the upper rotary
knob (15) until
appears in the display. To start Calc'n'Clean,
press the start button (10).
The display will guide you through the
programme.
Empty drip tray
Insert drip tray
● Empty drip tray (8) and replace them.
Calc'n'Clean in progress
The appliance rinses twice.
Open drawer
● Open the drawer (4).
Fill cleaner
● Drop a Bosch cleaning tablet in the draw­
er (4) and close.
N.B.: If the water ilter (20) is activated, the
display will prompt you to remove the ilter
(20) and then press the start button (10)
again. Remove the ilter now if you have not
already done so. Press the start button (10).
Fill descaler
Press start
● Pour lukewarm water into the empty wa­
ter tank (17) up to the 0,5l mark and dis­
solve 2 Bosch descaling tablets in it.
● Press the start button (10).
Place container
Press start
● Place a receptacle with a capacity of at
least 1 litre under the outlet (6a).
● Press the start button (10).
Calc'n'Clean in progress
e
off /
The descaling pro gramme will now run for
j
about 22 minutes.
e
off /
button (13) for at least
j
e
off /
Start Calc'n'Clean
en
but­
j
16.06.2011 11:47:02

Publicité

Table des Matières
loading

Table des Matières