Control Panel Indicator Lights; Starting/Stopping - Whirlpool LRF4001RY Guide D'utilisation Et D'entretien

2. Place garment(s) on hanger(s). Button shirts and jackets.
Smooth surfaces.
3. Slide hanger onto front of hanger bar at top of Fabric
Freshener. Position hanger in 1 of 2 slots.
NOTES:
The Fabric Freshener works best with no more than
2 clothing items per cycle.
Fabric Freshener will not operate if items are placed on
the bottom (exhaust grille) of Fabric Freshener.
Slide hanger bar through hole in top of pants hanger.
If using Cotton Performance Pack tensioning weights, add
weights to lower edges of garments. See "Accessories" for
information on ordering additional accessories.
NOTE: Do not use tensioning weights on garments that may
stretch easily.

Control Panel Indicator Lights

Start/Steaming
A Start/Steaming indicator light indicates Fabric Freshener cycle
has started and is in the steaming process.
Gentle Drying
A Gentle Drying indicator light indicates steaming cycle is
complete and the drying cycle has started.
8
Cooling
A Cooling indicator light indicates that the drying cycle is
complete and air is circulating to cool the garment(s).
Complete
A Complete indicator light indicates that the cycle is complete.
Unzip bag and remove items from Fabric Freshener.
NOTE: Metal hangers, buttons and zippers may be very warm.

Starting/Stopping

Start Fabric Freshener
WARNING
Explosion Hazard
Use water only.
Failure to do so can result in death or explosion.
NOTE: For drying cycle only, leave cycle cup empty and press
the ON/OFF button for approximately 1 second.
1. Remove cycle cup from cup receptacle. Fill cycle cup with
appropriate level of room temperature, distilled water
according to material being refreshed and the markings on
the side of the cycle cup. See Fabric Recommendations
chart.
IMPORTANT: Use distilled water only in cycle cup. Failure to
use distilled water may result in permanent damage to the
machine.
A. Cycle cup for distilled water only
B. Cup receptacle
A
B