König Electronic SEC-IPCAM100B(W) Mode D'emploi page 9

Enter a personal camera name and password and
select the tab:
4
(see Figure 17).
The new camera will be added to the list
(see Figure 18).
APPLE
5
Open the App "uCare Cam".
6
Select, in the camera list window, the "+" sign on the right top of the screen.
Select option "Scan camera QR code".
7
Note: you need to have a QR code scanner installed on your device.
8
Locate the QR code on the backside of the IP camera and scan the QR code.
The UID (Unique ID code) will show up after scanning the QR code.
9
Enter a personal camera name and select "DONE" on the top right side of the screen.
For further explanation of the app, the IP camera and the FAQ, please check the FULL
manual (English only) on the CD supplied with this product.
Figure16 Figure 17
9
Figure 18