Using Av Input - Pioneer AVIC-W8400NEX Manuel D'installation

Camera
When you use the rear view camera, the
rear view image is automatically switched
from the video by moving the shift lever to
REVERSE (R). Camera View mode also
allows you to check what is behind you
while driving.
WARNING
USE INPUT ONLY FOR REVERSE OR MIRROR
IMAGE REAR VIEW CAMERA. OTHER USE
MAY RESULT IN INJURY OR DAMAGE.
CAUTION
• The screen image may appear reversed.
• With the rear view camera you can keep
an eye on trailers, or back into a tight
parking spot. Do not use for
entertainment purposes.
• Objects in rear view may appear closer or
more distant than in reality.
• The image area of full-screen images
displayed while backing or checking the
rear of the vehicle may differ slightly.
This product
Power supply
Power cord
Violet/white (REVERSE-GEAR SIGNAL
INPUT)
Brown (REAR VIEW CAMERA IN) 23 cm
(9 in.)
Yellow (VIDEO INPUT) 23 cm (9 in.)
Rear view camera (ND-BC8) (sold
separately)
To video output
RCA cable (supplied with ND-BC8)
RCA cable (sold separately)
View camera (sold separately)
NOTES
• Connect only the rear view camera to
brown cable. Do not connect any other
equipment.
• Some appropriate settings are required
to use rear view cameras. For details, refer
to the Operation Manual.
External video
component

Using AV input

This product
Red, white (AUDIO INPUT) 23 cm (9 in.)
Yellow (VIDEO INPUT) 23 cm (9 in.)
RCA cable (sold separately)
To audio input
To video input
External video component (sold
separately)
NOTE
The appropriate setting is required to use
the external video component. For details,
refer to the Operation Manual.
Using an AUX input
This product
Mini-jack AV cable 2 m (6 ft. 7 in.)
AUX input (AUX IN) 15 cm (5-7/8 in.)
Mini-jack extension cable 2 m (6 ft. 7 in.)
Yellow
Red, white
RCA cables (sold separately)
To video output
To audio outputs
En
7