Remote Commander - Sony Trinitron PGM-200R1A Mode D'emploi

Remote Commander

1 POWER switch
2 MUTING button
3 RGB1/RGB2 buttons
4 LINE button
5 Y/C button
6 Number buttons
7 ZOOM button
8 STILL button
9 POWER ON switch
0 POWER OFF switch
!¡ ID MODE (ON/SET/
1 POWER switch
Press to turn on the monitor. Press again to turn it off.
2 MUTING button
Press to mute the sound. Press this button again or
press the VOL (volume) + button to obtain the sound
again.
3 RGB1/RGB2 buttons
(This button operates only when the Scan Converter
Adaptor BKM-201SC is installed into the monitor.)
4 LINE button
(This button operates only when the Scan Converter
Adaptor BKM-201SC is installed into the monitor.)
5 Y/C button
(This button operates only when the Scan Converter
Adaptor BKM-201SC is installed into the monitor.)
MUTING
RGB1
LINE
1
4
7
10/0
STILL
POWER
ON
OFF
ON
SET
OFF) buttons
OFF
ID MODE
!™ DISPLAY button
DISPLAY POWER
RGB2 YUV
!£ YUV button
Y/C
MTS/MPX
!¢ MTS/MPX button
2 3
5 6
8 9
!∞ CH button
CH
ZOOM DEGAUSS
!§ DEGAUSS button
!¶ SELECT +/– buttons
SELECT
MENU
!• MENU button
ENTER
!ª ENTER button
@º VOL +/– buttons
VOL CH
@¡ CH +/– buttons
6 Number buttons
Press to select the index number.
7 ZOOM button
(This button operates only when the Scan Converter
Adaptor BKM-201SC is installed into the monitor.)
8 STILL button
(This button operates only when the Scan Converter
Adaptor BKM-201SC is installed into the monitor.)
9 POWER ON switch
Press to turn on the monitor. When you use multiple
monitors, you can use this switch instead of the
POWER switch 1 not to affect another monitor which
is already turned on.
(Continued)
7
(EN)