Voice Command Operations; Voice Command Features - Clarion NAX983HD Mode D'emploi

8. Voice Command Operations

This navigation system has a built in voice recognition function. You can perform fundamental operations
by saying the corresponding voice commands.
Note:
• The supported languages by the voice command function are English, French, German, Italian, Dutch and
Spanish. You can perform voice command operations after switching to a supported language.
For details of switching languages, please see the "Language Setting" (P. 52).
• When the language setting is set to Swedish, Portuguese, or Denmark, [Voice] button is not available.

Voice Command Features

Voice Command menu
1
1 [D]/[d] key
Displays the previous page or next page of the
Voice Command list. You can also operate by
saying "Previous Page" or "Next Page".
2 Voice Command list
This is the list of the commands for voice
operation. The available commands at that time
are displayed in yellow. You cannot operate by
touching this list.
3 [Map] key
Suspends the voice recognition, and returns to
the Current position screen. You can also
achieve this by saying "Map".
4 [
] key
Suspends the voice input listening mode, and
displays the available command list. Touching
this again returns to the voice input listening
mode.
6
2
5 [Back] key
Returns to the previous screen. When the voice
command operation is suspended, returns to the
voice input listening mode.
6 Voice input waiting time indication
bar
Indicates the time remaining of the voice input
listening mode. Say the desired command during
the blue bar is displayed. The system returns to
the previous screen when the blue bar runs out.
Note:
Various operation advices are displayed according
to the status at the bottom of the screen. You can
refer to them while operating the voice recognition.
5
4
3
NAX983HD
59