Masquer les pouces Voir aussi pour NAX983HD:
Table des Matières

Publicité

Searching Your Destination from the Destination Menu

Going Home

When your home address is registered, you can
start route guidance to your home by a simple
operation.
Note:
When your home address is not registered, register
it by touching the [Home (Add New)] key. When the
list of searching methods appears, register your
home address by the desired method. You can also
register your home from the [Stored Data] of the
Navigation settings. ➜ "Home Location" (P. 50)
1. Touch the [Home] key.
The route to your home is automatically
calculated and the route guidance is started.
By Postal Code
You can search for destinations by entering the
country name and the postal code of the place
you wish to go to.
Note:
In some countries or districts, it may be hard to
search specific places. In such cases, use postal
code seach as a subsidiary function of searching
addresses.
1. Touch the [Postcode] key.
2. Touch the [Country] key, and touch the
desired country name.
3. Touch the [Postcode] key.
The postal code input screen is displayed.
4. Enter the postal code by touching numbers on
the screen.
5. Touch the [OK] key.
For the rest of the procedure, read the sections
that apply to the country of your residence.
●When the [Country] is set to the United
Kingdom or the Netherlands
1. Touch the [Pinpoint Search] key.
[Area Search]
Displays the City name list that corresponds
to the input postal code. Search a place by the
same way of searching by address.
2. Confirm the location of the destination, then
touch the [OK] key.
If a different place from where you wish to go
to is displayed, touch the [Back] key to return
to the previous screen, then perform the
procedure of "When the [Country] is set to an
other than the United Kingdom and the
Netherlands" listed below.
3. Touch the [Start] key.
28
NAX983HD
●When the [Country] is set to an other than
the United Kingdom and the Netherlands
1. Touch the [Area Search] key.
2. Touch the desired City name to select.
The Address input screen is displayed.
3. If required, enter the Street name and House
No., then touch the [OK] key.
4. Touch the [Start] key.
By Previous Destination
The destinations previously used are registered
in the previous destination list (up to 100
locations). You can enter a destination by
selecting it from this list. When the previous
destination list exceeds 100 items, the oldest
entries are automatically deleted.
1. Touch the [Previous Destination] key.
2. From the displayed previous destination list,
touch the place you wish to go.
3. Touch the [OK] key.
4. Touch the [Start] key.
By Previous Starting Point
You can set the last start location as the
destination. In case you want to set a return route
from the reached destination, you can enter the
new destination quickly using this method.
1. Touch the [Previous Starting Point] key.
2. Confirm the location of the destination, then
touch the [OK] key.
3. Touch the [Start] key.
By the stored route
Selects a route previously registered, then set it
as the new route.
Note:
To use this function, one or more registered routes
are required. When a route is currently set, you can
register this route by touching the [None (Add New)]
key in case the route contains at least one waypoint.
You can also register the current route using the
Route menu. ➜ "Stored Route" (P. 51)
1. Touch the [Stored Route] key.
2. From the displayed stored route list, touch the
route you wish to set.
3. Touch the [Start] key.

Publicité

Table des Matières
loading

Table des Matières