Faber SAN T30 X Manuel D'utilisation page 5

Key Key Press
A Short
Long
Short
B
C Short
Attention:
If all the LEDs flash simultaneously, it means that the UV-C lamps need to be replaced.
The UV-C lamps must be replaced after 6000 hours of operation.
To replace them, contact Technical Assistance.
Functions
Manual mode
Turns on/off the UV-C lamp and ventilation at minimum speed.
After 24 hours, the lamp and ventilation are turned off automatically.
It performs the lamp replacement alarm reset.
Day mode
Turns on/off the UV-C lamp and ventilation at maximum speed.
After 2 hours, the lamp and ventilation are turned off automatically.
Night mode
Turns on/off the UV-C lamp and ventilation at minimum speed.
The automatic operating mode starts with a 24-hour work cycle in
which the device remains on for 5 hours and off for the next 19
hours.
After 7 days the night mode will be turned off automatically.
LED
On
A, B, C, off
On
On
5