Pioneer DJM-TOUR1 Mode D'emploi page 10

Q SEND terminals (page 12 )
Connect to the input terminal of an external effector. When
[L (MONO)] only is connected, monaural audio is output.
R RETURN terminals (page 12 )
Connect to the output terminal of an external effector. When the
[L (MONO)] channel only is connected, the [L (MONO)] channel
input is simultaneously input to the [R] channel.
S SECOND HEADPHONES CUE button
Press the [CUE] button for the channel you want to monitor with
SECOND HEADPHONES.
T SECOND HEADPHONES MONO SPLIT / STEREO
selector switch
Switches how the monitor sound output from SECOND
HEADPHONES is distributed.
U SECOND HEADPHONES MIXING control
This adjusts the monitor volume balance of the sound of channels for
which the [CUE] button is pressed and the sound of the [MASTER]
channel.
V SECOND HEADPHONES LEVEL control
Adjusts the level of audio output from SECOND HEADPHONES.
W Display shade attachment screw hole (page 13 )
Do not pull on the channel fader and crossfader knobs with excessive
force. The knobs have a structure by which they cannot be pulled off
easily. Pulling the knobs strongly may result in damaging the unit.
10
En