Publicité
Les langues disponibles
Les langues disponibles
times to select your desired water temperature among the four temperature values
50°C→70°C→80°C→90°C→exit from temperature selection→50°C... Press the on/off button and the
kettle starts boiling water, and the specific temperature indicator below the selected temperature
turns on. The kettle has indicator lights in different colours for each temperature setting: Green –
50°C, Light blue - 70°C, Dark blue – 80°C, Purple - 90°C. Once the desired temperature has been
reached, the kettle stops heating automatically with two beep sounds.
3) Heat up the water and then keep warm: Press the temperature adjustment button to select your
desired temperature among 50°C,70°C, 80°C and 90°C. Keep-warm function is not suitable for 100°C.
Then long press the on/off button "
selected temperature will keep flashing. Once the selected temperature has been reached, the kettle
stops heating automatically. One beep sound is sent out when the selected temperature is reached for
the first time. If the water temperature drops down, the kettle will start heating up to the selected
temperature again. The kettle will keep the water warm for 2 hours and then shut off automatically. If
you want to reselect the keep-warm temperature, please press the on/off button "
unit first and then restart the process.
4.
Additionally, please note that every time you take the kettle away from the power base your setting will
be lost. You have to reset the kettle after putting it back again.
Note:
1) Operate carefully when pouring the water from your kettle as boiling water may result in scald. Besides,
do not open the lid while the water in the kettle is hot. Ensure power supply is turned off when kettle is
not in use. The kettle may be stored on the power base when not in use.
2) Should you accidentally allow the kettle to operate without water, the boil-dry protection will
automatically switch it off. If this should occur, allow the kettle to cool before filling with cold water and
re-boiling.
3) There is a tolerance between the real temperature in water kettle and the temperature shown with
indicators, depending on the capacity of water, household voltage, environment temperature and
humidity.
This appliance is equipped with a tea basket and filter. You can add tea into the basket before heating to
brew together with the water. If you do not need to use it, you can rotate the tea basket off.
Make sure the basket is locked in place before use. Pay attention to the reminders shown on the basket as
below. ("Open" = basket unlocked, "Lock" = basket locked)
CLEANING AND MAINTENANCE
1.
Always let the kettle cool down first and disconnect the appliance from the power outlet before cleaning.
2.
Never immerse the kettle area or cord in water, or allow moisture to contact with these parts.
Cleaning appearance of housing
Wipe the appearance of body with a mild and damp cloth or cleaner, never use a poisonous cleaner.
Never immerse the power base in water or other liquid for cleaning.
CAUTION: Do not use chemical, steel, wooden or abrasive cleaners to clean the outside of the kettle.
" to start keeping warm the water. The indicator below the
- 6 -
" to turn off the
Publicité
