Using The Alarm; Technical Details - Marmitek MT10 BEDROOM Mode D'emploi

4. USING THE ALARM

Use the alarm function and you'll never have to wake up in a dark room again. The alarm
setting is connected to the setting for module 1 (or 5). If the "WAKE UP" switch [12] is set to
ON, the alarm will sound at the time programmed for the ON side of module 1 (or 5). See
"Programming actions" for instructions on how to set the timer for a module. If the alarm
sounds, press any button on the timer to turn the alarm off. The alarm is now silent and will
sound again after 10 minutes (snooze). The activated module will remain on until you press
the OFF button for the module.
You can turn the alarm off by setting the "WAKE UP" switch to OFF.
DEACTIVATING THE ALARM
You can deactivate the alarm by setting the "WAKE UP" switch [12] to OFF.
The alarm will then not sound the next morning. The lamp programmed under button 1 (or
5) will however be switched on at the programmed time. If you do not want the lamp to
switch on, set the mode selector [1] to "SET CLOCK".
5. USING THE SECURITY FUNCTION
You can use the Security function to make sure burglars do not realise your lights are
switched on by a timer. The Security functions adds a random number of minutes (max. 60
min.) to the time programmed. You can activate the Security function by pressing the
"SECURITY" button [9] after step 4 in the programming routine (Security works both for the
ON as OFF times).
6. USING THE SLEEP FUNCTION
Press the ON button of the module you want to have switched on at a later time and then
press the "SLEEP" button (7) within 4 seconds. The module will now be switched off after 15
minutes (Press twice for 30 minutes, three times for 45 minutes, etc.). You can also
automatically switch on a module at a later time by pressing OFF instead of ON at the
beginning of the procedure.

7. TECHNICAL DETAILS

Power:
Backup battery:
Minimum backup power: 6 V DC
Low battery indicator:
Dimensions:
Weight:
Colour:
MT10 BEDROOM X-10 CONTROLLER
230V +10% -15 %, 50 Hz
9 V block battery
7,5 V +/- 0,5 V DC
55 x 150 x 110 mm
590 g
Silver
5