Gardena EasyCut 400 Mode D'emploi page 7

5. Storage
Storage :
Disposal :
(in accordance with
RL2002 / 96 / EC)
6. Maintenance
RISK OF INJURY !
RISK OF INJURY !
Cleaning the cover and the
ventilation slots :
P
P
O
Replacing the filament cassette:
R
S
V
16
The Turbotrimmer must be stored out of the reach of children.
v Store your Turbotrimmer in a dry place where it is protected
from frost.
Recommendation : The trimmer can be hung up by the handle.
The cutting head is not put under any unnecessary strain if the
trimmer is stored hanging up.
The product must not be added to normal household waste. It
must be disposed of in line with local environmental regulations.
v Important : Make sure that the unit is disposed of via your
municipal recycling collection centre.
There is a risk of injury from the cutting filament !
V Always unplug the mains plug of the Turbotrimmer be-
fore carrying out maintenance work !
Risk of injury and risk of damage to property !
V Never clean the Turbotrimmer under running water or
with a water jet (in particular a high pressure water jet).
The ventilation slots must always be free of dirt.
v After each use remove grass and dirt residue from the cover
and the ventilation slots
(PowerCut 500 has ventilation slots on the front
RISK OF INJURY !
V Never use metallic cutting elements or
A
Q
replacement parts and accessories not
provided by GARDENA.
R
Only use original GARDENA Filament Cassettes. You can
order Replacement Filament Cassettes from your GARDENA
dealer or directly from the GARDENA Customer Service.
• Filament Cassette for EasyCut 400 / 480 / ComfortCut 450 /
PowerCut 500 : Art. No. 5307
1. Unplug the mains plug.
2. Turn over the Turbotrimmer and rest it on the rubber buffer
of the handle.
3. Press in cassette cover
time and remove.
4. Remove the filament cassette
P
.
P
Q
on the two catches
S
.
O
).
R
at the same