Environmental Information - Sharp AR-6020 Mode D'emploi

Information on Disposal
Information on the Disposal of this
Equipment and its Batteries
IF YOU WISH TO DISPOSE OF THIS EQUIPMENT, DO NOT
USE THE ORDINARY WASTE BIN, AND DO NOT PUT THEM
INTO A FIREPLACE!
Used electrical and electronic equipment and batteries
should always be collected and treated SEPARATELY in
accordance with local law.
Separate collection promotes an environment-friendly
treatment, recycling of materials, and minimizing final
disposal of waste. IMPROPER DISPOSAL can be harmful
to human health and the environment due to certain
substances! Take USED EQUIPMENT to a local, usually
municipal, collection facility, where available.
This equipment contains a BATTERY which cannot be
removed by the user. For battery exchange, please contact
your dealer.
If in doubt about disposal, contact your local authorities or dealer and ask for the
correct method of disposal.
ONLY FOR USERS IN THE EUROPEAN UNION, AND SOME OTHER COUNTRIES;
FOR INSTANCE NORWAY AND SWITZERLAND: Your participation in separate
collection is requested by law.
The symbol shown above appears on electrical and electronic equipment (or the
packaging) to remind the users of this.
If the equipment has been used for BUSINESS PURPOSES, please contact your
SHARP dealer who will inform you about take-back. You might be charged for the
costs arising from take-back. Small equipment (and small quantities) might be taken
back by your local collection facility. For Spain: Please contact the established
collection system or your local authority for take-back of your used products.

Environmental information

Please read this part carefully. It will help you to reduce your
impact on the environment and help you to reduce your costs at
the same time.
Saving paper
1. The automated duplex printing function is for printing both sides of paper
automatically without turning over the paper manually. If the machine is
equipped with the automated duplex printing function, set up your print
settings on your computer to automatically print double-sided. Please use the
automatic duplex printing function of this machine wherever possible.
2. By printing on recycled paper and thin 64g/m2 paper that meet the standard
EN12281:2002 and similar quality standards ,you can reduce the impact on
the environment.
Saving energy
1. This machine has an energy save mode for reducing power consumption largely.
When the machine is not used for a certain period of time, the machine switches to this
less power-consuming mode. In this mode, the power supplies of the operation panel
and fusing unit are shut off. Thus the power consumption can be reduced. The recovery
time from this mode requires more time than from the "ready mode". You can adjust the
times the machine switches to the energy save mode. For models with a power-save
button: If your next print would be later than the set time for the energy save mode, we
recommend to press the power-save button to activate the power saving at once. For
models with automated power management function that adjusts itself to the usage
pattern of the device, or also for models with eco scan mode, we recommend the use of
it in order to reduce the energy consumption and save additional costs. These energy-
saving functions are described in detail in the operation manual.
2. This machine complies with the latest version of the International Energy Star
criteria. The "International Energy Star Programme" is a voluntary registration
scheme for energy-saving office devices.
Cartridge disposal and treatment
Regarding your used Sharp toner cartridges and other consumables from Sharp
copiers/multifunctional machines, please observe that these waste products
shall be treated properly according to the legal requirements in your area.
We recommend to contact competent service providers (e.g. waste recycling
companies) for this, and to ask local authorities for support, when necessary.
For information on existing Sharp collection and recycling programs, which
exist in some countries, please see our website www.sharp.eu.
About password management
It is requested to change the administrator password right after
installing the machine. The password should be changed by the
administrator and strictly managed. Write down the changed
password in the following table and keep it carefully.
Please write "New Password".
Factory default
Administrator
Sharp
password
Please take care not to forget newly set administrator
password. If it is forgotten there is no way to confirm
it and some settings and functions that require
administrator authorization may not be used.
Users from PRIVATE
HOUSEHOLDS are
requested to use
existing return facilities
for used equipment.
Return is free of charge.
New Password
Turning the power on and off
Turning on the power
Switch the main power switch to the "
Turning off the power
Switch the main power switch to
the " " position.
Before switching off the main
power switch, make sure that
the data indicator and the
line indicator are off on the
operation panel.
Operation manuals
The instructions for this manual are separated in the following two sections.
Before using the machine
Start Guide: this manual
This section explains precautions to ensure safe usage, part names
and how to switch on/off the power. This section also includes
important information for persons that are responsible for the
maintenance of this machine.
Read this section before using the machine for the first time.
Directions for use
Operation Guide (PDF)
Information on the copier and other various functions that this
machine provides have been compiled into a PDF file called
[Operation Guide].
Read the Operation Guide to learn how to use this machine, when
you want to know more about its functions, or when you have trouble
operating it.
How to read the Operation Guide
The Operation Guide on the accessory CD-ROM provides detailed
instructions for operating the machine. The Operation Guide is
provided in PDF format.
Insert the supplied CD-ROM into your CD-ROM drive. CD-ROM
will run automatically.
If it does not start automatically, double-click the CD-ROM icon or
display the contents of the CD-ROM and double-click "index.html".
To view the manual in PDF format, Acrobat Reader or Adobe Reader
of Adobe Systems Incorporated is required. If neither program is
installed on your computer, the programs can be downloaded from the
following URL: http://www.adobe.com/
System settings password
A password is necessary to change the machine's system settings
using administrator authority. System settings can be changed from
either the operation panel or using a computer web browser.
Password for logging in from a computer
There are two accounts that can log in from a web browser:
"Administrator" and "User". The factory default passwords for each
account are shown on the right side. Signing in as an "Administrator"
will allow you to manage all the settings available via web browser.
User
Administrator
Please take care not to forget newly set administrator passwords.
Points to notice when connecting to the
network
When connecting the machine to the network, do not directly connect to the
internet but to the sub network (range divided by the router) in which only the
authorized device (such as PC) for the communication with the machine in
the protected LAN in some way like firewall is connected. And manage the
connected devices in the sub network so that the network condition may always
be maintained. Also use the filter setting function to prevent illegal access.
4
" position.
Main power
switch
Account Password
users -
admin Sharp