Blackmagic Design HyperDeck Manuel D'utilisation Et D'installation page 62

The "timecode" value is the timecode within the current timeline for playback or the clip for record. The "display
timecode" is the timecode displayed on the front of the deck. The two timecodes will differ in some deck modes.
Asynchronous transport information change notification is disabled by default and may be configured with the
"notify" command. When enabled, changes in transport state will generate a "508 transport info:" asynchronous
message with the same parameters as the "208 transport info:" message.
Video Formats
The following video formats are currently supported on HyperDeck Studio:
NTSC, PAL, NTSCp, PALp
720p50, 720p5994, 720p60
1080p23976, 1080p24, 1080p25, 1080p2997, 1080p30
1080i50, 1080i5994, 1080i60
HyperDeck Studio Pro adds supports for 4k formats:
4Kp23976, 4Kp24, 4Kp25, 4Kp2997, 4Kp30
HyperDeck Studio 12G adds support for the following 4k formats:
4Kp50, 4Kp5994, 4Kp60
Video format support may vary between models and software releases.
File Formats
The HyperDeck Studio and HyperDeck Studio Pro currently support the following file formats:
QuickTimeUncompressed
QuickTimeProResHQ
QuickTimeProRes
QuickTimeProResLT
QuickTimeProResProxy
The HyperDeck Studio Pro and HyperDeck Studio 12G additionally support the following file formats:
QuickTimeDNxHR220
DNxHR220
Supported file formats may vary between models and software releases.
Querying and updating configuration information
The "configuration" command may be used to query the current configuration of the deck:
configuration↵
The server returns the configuration of the deck:
211 configuration:↵
audio input: "embedded", "XLR", "RCA"↵
video input: "SDI", "HDMI", "component"↵
file format: File format↵
↵
One or more configuration parameters may be specified to change the configuration of the deck.
To change the current video input:
configuration: video input: "SDI", "HDMI", "component"↵
Valid video inputs may vary between models. To configure the current audio input:
configuration: audio input: "embedded", "XLR", "RCA"↵
Valid audio inputs may vary between models.
To configure the current file format:
configuration: file format: File format↵
Developer Information 204