Inner Panel Installation - Regency Horizon HZ40E Guide D'installation Et D'utilisation

1) Remove the faceplate and glass door if already installed - see
manual for instructions.
2) Install the back panel fi rst. Tilt the panel forward - position the bottom
of the panel fi rst. Use care not to scratch or mar the panel on the
pilot shield.
3) Install the left side panel - secure in position with the panel clip and
two screws, as shown in the diagram below.
4) Install the right side panel - secure in position with the panel clip and
two screw.
Regency Horizon™ HZ40E Gas Fireplace
919-076
INSTAllATION dE PANNEAU INTÉRIEUR

INNER PANEL INSTALLATION

5) Reinstall glass door - reinstall faceplate.
6) Final installation
1
HZ40E
installation
49
08/24/11