Arm / Disarm; To Arm The Alarm System; Important - Toyota VSS3 Mode D'emploi

2. Arm / Disarm

LOCK
(Arm)
UNLOCK
(Disarm)
The alarm system will be armed when you lock the car, and disarmed when you unlock the car
using the remote key.

2.1. To ARM the alarm system

Important:

To prevent false alarm, check that there is no one in the car, and that all windows and sliding
roofs are closed before locking the car (see how to deactivate the interior intrusion sensor in
paragraph 2.).
Action
Remote control: Press the
lock button once.
Note:
– The car LED blinks to inform you that the immobiliser is set (not linked to alarm system)
– If any door is not securely closed, 10 short beeps will sound (car will not be locked, but alarm
system will be armed) and the switch will be deactivated until door is closed properly.
– The system will be armed 30 seconds after the lock button is pressed (pre-arm time).
– If your remote key is not working, you can arm the system by PIN code (see chapter 3.2).
Hazard light indication
Flashes once.
Alarm status light (LED)
ON for 30 seconds, then
starts flashing.
VSS3 7