Arm Without Intrusion Sensor - Toyota VSS3 Mode D'emploi

2.. Arm without intrusion sensor

If you have to lock the car with somebody inside (passenger, children, dog, ...), or if you want to
leave the window open, you must deactivate the intrusion sensor.
Activation steps
1 Lock the car by the
remote control.
2 During the first
30 sec., press the
lock button again
once.
Summary:
press the remote
twice within 30 sec.
Note:
– The interior sensor is deactivated for 1 use only. Next time you arm, the interior sensor will be
activated again.
Hazard light
indication
Flashes once.
Flashes once.
Alarm status
light (LED)
ON for 30 sec.
ON for 30 sec.
Buzzer
1 beep sound if
buzzer enabled.
1 beep sound if
buzzer enabled.
VSS3 9