Pin Code - Toyota VSS3 Mode D'emploi

1. PIN code

If the alarm system has been installed in your vehicle, you did receive from the authorized retailer a
card (credit card size) with a PIN code (Personal Identification Number) consisting of 4 numbers.
The PIN code is used to deactivate the alarm system in case the remote control stops working. It
will also be used by your authorised dealer to change your system configuration.

You should keep this card always with you. Do not leave it in your car.
If you have lost your PIN code, take contact with your authorized retailer.
1 Press the button on the LED push button the number of times that corresponds to the first
digit of the PIN Code, with a maximum 1.5 second delay between one press and the next.
If the LED is already on when the button is pressed, it will go out.
2 Wait for the LED to flash indicating that the next digit can be entered.
3 Repeat the process for all four digits.
6 VSS3
To enter the PIN code