Arming Buzzer; Buzzer Volume Adjustment - Toyota VSS3 Mode D'emploi

To exit:
1. Turn IG ON.
2. A long push on the remote unlock button, or on the LED push button.
Note:
During garage mode, the LED will flash at each ignition ON.
The exit from garage mode will be confirmed by 5 hazard flashes.

3.8. Arming buzzer

This option is disabled as default. To enable it, please contact your authorised retailer.
You can activate the buzzer to sound when you arm/disarm the system.
Remark:
– This can only be done in accordance with the local regulations.

3.9. Buzzer volume adjustment

The volume of the buzzer can be adjusted. Please contact your authorised retailer.
VSS3 15