Alarm Status Light (Led); Back-Up Battery - Toyota VSS3 Mode D'emploi

2.7. Alarm status light (LED)

The status LED is used to give information to the user, during normal operation, and as a
diagnostic tool.
Condition
Disarm state:
Pre-arm state (30 sec
arming time):
Arm state:
Alarm state:
Programming mode
selection:
After an alarm:

2.8. Back-up battery

Your alarm system has a rechargeable battery back-up. It is fully recharged after 12hrs of driving.
Alarm status light (LED)
LED off
LED on
LED blinking
LED blinking
LED on when entering the mode, after blinking
Number of flashes gives feedback from alarm cause
VSS3 11