2.2. To DISARM the alarm system
Action
Remote control: Press the
unlock button once.
Note:
–
If no door is opened within 30 seconds after disarming, the system will re-arm automatically
and the doors will be locked again.
–
If your remote key is not working, you can arm the system by PIN code (see chapter 3.2).
WARNING:
When the system is armed, do not unlock any door using the key as this will sound the alarm.
2.3. Stop the siren sounding
Unlock the door by the remote control. The siren will stop and the system will be disarmed.
Note:
–
If after this, no door is opened within 30 seconds, all doors will automatically lock and the
system will re-arm.
–
If your remote key is not working, you can arm the system by PIN code (see chapter 3.2).
8
VSS3
Hazard light indication
Flashes twice.
Alarm status light (LED)
Stops flashing.