Intended Use; Responsibility Of The Operator - WIKA RTD Mode D'emploi

3. Safety
Information
... points out useful tips, recommendations and information for efficient and
trouble-free operation.
EN

3.2 Intended use

The thermometers described here are suitable for temperature measurement in industrial
applications.
Depending on design, these thermometers can be mounted directly into the process or
within a thermowell. The designs of the thermowells can be selected as desired, but the
operational process data (temperature, pressure, density and flow rate) must be taken into
account.
Neither repairs nor structural modifications are permitted, and any would void the
guarantee and the respective certification. The manufacturer shall not be responsible for
constructional modifications after delivery of the instruments.
The instrument has been designed and built solely for the intended use described here,
and may only be used accordingly.
The technical specifications contained in these operating instructions must be observed.
The manufacturer shall not be liable for claims of any type based on operation contrary to
the intended use.

3.3 Responsibility of the operator

The system operator is responsible for selecting the thermometer or thermowell, and for
the selection of their materials, so as to guarantee their safe operation within the plant or
machine. When preparing a quote, WIKA can only give recommendations which are based
on our experience in similar applications.
The safety instructions within these operating instructions, as well as the safety, accident
prevention and environmental protection regulations for the application area must be
maintained.
The operator is obliged to maintain the product label in a legible condition.
6 WIKA operating instructions RTD and TC